Westville Grand Rental Station

The York Rake Model RW, with a 6' width, consists of a quick hitch compatible three-point hitch frame and 6' rake.

Our complete gas-welding kit includes an oxygen and acetylene tank with regulators, along with a brass torch assembly with turbo lever. Use this oxyacetylene torch for welding pipes and tubes, and other metal repair work. It's also used to fabricate metal artwork. Use it for iron or steel welding, plus brazing, braze-welding, cutting, bending and forming.

Takeuchi's track loader with rubber tracks combine the capabilities of a track loader with the versatility of operation on improved surfaces. Trailer included with this rental.

Operating weight 7497#

Overall width with bucket 66"

Dump height fully raised 93.4"

Operating capacity 1620#

These Stanley breakers don't use a high-pressure (350-700 psi) accumulator for power; instead they use a ''gas-assist'' cycle and utilize the hydraulic system for most of the firing power. 450lb class. Call for pricing if skid steer is also required.

Hang anything at accurate levels throughout the room. Great for drop ceilings!

Molded of HDPE material, Cone and base are one continuous layer to prevent tearing and base separation.

This lift has a platform height of 33' 6" with a working height of 40'. A trailer is provided for transport at no additional charge. 2 person, 500# capacity bucket: 3' 7" x 2' 2"

length: 13'

travel width: 3' 7"

working width: 11' 8"

weight: 4080#

This rotating nozzle is perfect for quick and efficient pressure washing or paint removal.

Melrose's sweeper attachment is perfect for parking lot, city street, construction site, and road sweeping. Call for pricing if skidsteer is required.

Melroe Loader Landscape Box cuts into dirt better than most to remove rocks and debris. Call for pricing if skid-steer is required.

24" Magnetic Floor Sweeper with release lever & heavy duty reinforced handle, great for cleaning up nails, screws, debris from store aisles, parking lots, lumber yards or after roofing jobs.

8000 lb capacity. Lift, push, pull, or clamp

Kit includes two wall jack assemblies able to lift walls 8' to 13' 6". Set of 2 Jacks with this rental.

Digs trenches up to 36" deep and approx 5" wide. Easily attaches onto our Toro Dingo mini skid loader or mini track loader. Dingo Mini wheeled Loader/Trencher kit $250.00. Mini Track Loader/Trencher kit $275.00

Working Width 72 in. Moldboard Height 14 in. Call for pricing if tractor is required.

1100 lb Rated, 990mm (3' - 3") Fixed Pallet Fork

Auger bits available in 9" or 12" x 4' deep. We offer a mini skid loader or a mini track loader to run this unit.

John Deere 66" Grapple Bucket

Skid-steer front end loaders have become widely used for a number of reasons: their small size and maneuverability allow operators to use them in tight spaces; being light, they can be towed behind a full-size pickup truck; and with the wide array of attachments available, they are extremely versatile. Trailer is included with this rental.

Weight = 6300#

Width = 66"

Height = 6'3"

Bits available in either 9" or 12" x 4' deep. Call for pricing if skid-steer is needed.

The John Deere MX5 rotary cutter attachment has a top deck that is domed. Water, grass, and crop debris tend to roll off the deck, reducing water buildup and deck rust. The domed shape and smooth profile of the top deck also make the deck easier to clean when trash does build up in adverse conditions. Designed for Cat 1 three point hitch tractor . Call for pricing if tractor is required.

John Deere's 655 tiller attachment has commercial-duty tilling capacity at 55". The tiller is raised and lowered by use of tractor hydraulic lift for operator convenience. 

Jet Industries breakers come in a variety of weights and sizes to suit all applications where hard punching breakers are needed. Requires a towable compressor with a minimum 80cfm @ 100psi.

Jet Industries breakers come in a variety of weights and sizes to suit all applications where hard punching breakers are needed. Requires a towable compressor with a minimum 80cfm @ 100psi.