Westville Grand Rental Station

The APF 10/33 is the lightest and smallest of all Ammann Vibratory Plate Compactors. Its size makes it ideally suited to small jobsites and confined areas.

This forward-moving plate compactor is often utilised by landscape contractors to reach hard-to-access spots. Homeowners also use the APF 10/33 because of its manageable size.

The standard guide handle and its vibration isolation improve operator comfort. When the job is finished the compactor is small enough to fit in the trunk of a passenger car.

The APF 15/50 Plate Compactor combines the powerful Ammann exciter system with industry-leading low hand-arm vibration (HAV) levels.

The result is a powerful compactor that’s comfortable and safe for operators, too. The plate features a working width of 500 mm and engine power of 2.9 kW (4 HP).

Pad available for $300.00

The Bosch Brute Turbo Breaker Hammer delivers unmatched performance with 43 ft-lbs of impact energy, all while weighing just 63 lbs for easy handling. Built for power and comfort, it features Active Vibration Control and ergonomic shock-absorbing handles to reduce fatigue during extended use. Ideal for tough demolition jobs, it operates on a standard 15-amp outlet or a 2,500-watt generator, making it both powerful and portable for any job site.

The light weight and narrow width make the plate a great fit on small or confined worksites. The hydrostatic forward and reverse steering enables quick directional changes and compaction in tight spaces.

The 695XL features include an easy to start engine with higher energy ignition system and a 12" bar

Use on concrete, stone, masonry, ductile iron pipe, cast iron pipe and more

The 695XL is the highest horsepower ICS gas power cutter for frequent-use by general construction, utility contractors and concrete professionals. (Chain Saw)

EDCO Vacuum Systems can be used for dust control with EDCO Grinders, Scarifiers, Scabblers, and Hardscape & Masonry Saws.

• Helps exceed the OSHA Respirable Crystalline Silica Regulations
• NOT to be used with water. This is not a wet vac.

The modern day Concrete Floor Grinder was invented and is constantly improved by EDCO. The Magna-Trap® Floor Grinders combine leveling systems, better dust control, and new accessories to create superior surface preparation machines. Inserts are additional.

 

Bosch Power Tools deliver stronger performance and lasting reliability. The Bosch 1365K 14 In. portable abrasive cutoff machine features a compact, lightweight design with a wraparound side handle. The unit's large footplate improves stability and allows a 4-7/8 In. depth of cut. In addition, the wheel rotation carries sparks, dust, and debris away from the operator.

6 cubic foot capacity, powered by Honda gas engine, 2" ball required for towing.

• Preparing a smooth, flat floor to receive a new coating
• Removing coatings
• Grinding rough concrete surfaces
• Grinding surfaces 4 times faster than a traditional floor grinder

Tough, wear resistant, ductile iron baseplate offering high strength and shock resistance. This patented computer designed baseplate has a tapered bottom and edges for high speed and excellent maneuverability. Designed for the compaction of granular and mixed materials with some cohesive content in confined areas such as parking lots, highway and bridge construction, next to structures, curbs and abutments

This rammer has set the standard in the construction industry. Powered by the exclusive WM 80, this 2-stroke engine is specifically designed and built for vibratory rammers and meets EPA air emission standards. This rugged rammer is designed for maximum production, performance and durability. Exclusive air filter compensation system allows for longer run time between filter changes

Designed and built with the most advanced technology, these walk behind trowels offer high quality concrete finishing plus added gyroscopic safety sensor and patent-pending engine speed limiter provide tripple protection for the operator. This unique system minimizes a runaway handles situation

Ideal For...

8″ working width will scarify approximately 350-500 sq. ft. per hour at Depth Per Pass of 1/8″

Removes traffic lines at 800-1,000 lineal ft. per hour

Power source over drum to eliminate vibration and maximize surface contact

Compact design

Front-mounted lifting handle makes loading and unloading easy

Vacuum port equipped

Optional water misting system

The drum batch capacity of these mixers is between 1 1/2 - 2 bags.

This heavy-duty motor is designed for the rigors of the job site. Multiquip flex-shaft vibrators are designed for work in medium to high-slump concrete. Typical applications include small pours, slabs, driveways, stem walls and footings.

The 25CMP is the perfect tool for homeowner projects, feed blending on the farm, small jobs on the construction site, plus many other uses...

48" round end magnesium bull float, made from the finest extruded magnesium available. Lightweight, long wearing & properly balanced to provide the finish you want. Includes {2} 6' handles

Jet Industries breakers come in a variety of weights and sizes to suit all applications where hard punching breakers are needed. Requires a towable compressor with a minimum 80cfm @ 100psi.

Jet Industries breakers come in a variety of weights and sizes to suit all applications where hard punching breakers are needed. Requires a towable compressor with a minimum 80cfm @ 100psi.

A set of 6 carbide strip serts that are designed to remove mastics and epoxies from concrete, capable of removing mastics, paints, resins, and more. These strip serts are used with the Edco double head electric floor grinder.

5 Times faster than grinding stones. Long lasting up to 30,000 sq feet (2,800 sq meters) of grinding action. These dyna-serts are used with the Edco double head electric floor grinder.