Westville Grand Rental Station

• Calibrated to +/- 4% clockwise direction and +/- 6% counter clockwise direction at 20% to 100% of full scale.
• Manufactured to meet standard industrial torque applications, general industry, heavy equipment, and maintenance.

1/2", 13MM, Heavy Duty Impact Wrench, Reversing, 7.5 Amp, 2100 RPM, 325 FT/LBS Maximum Torque, 2700 Impacts/Minute, Soft Grip, Ball Bearing Construction, Die Cast Aluminum Gear Housing, AC/DC Forward/Revese Rocker Switch, Detent-Pin Anvil.

 

• The Outback® 185 engine driven welder has portable DC stick welding with AC generator power.
• All Engine Controls on Front Control Panel
• 6.8 Gallon (25.7 Liter) Fuel Tank

JET L-100 Series Manual Chain hoist combine a true rugged industrial design with highly refined quality. The drop forged, carbon steel hooks are quenched and tempered to increase strength and will slowly stretch to indicate an overload situation. Cast steel safety latches, attached with Allen head screws and lock nuts, outclass the industry standard of stamped safety latches. The induction hardened, 100 grade load chain provides 20% more strength then the common 80 grade load chain found on inferior chainfalls. The double enclosed brake cover keeps dirt and debris away from the brake mechanism. While the sealed ball bearing supported load sheave provides efficient and smooth operation. All the internal pats are Zinc coated for additional corrosion protection. The triple spur gear drive train features alloy steel gears that have been heated treated, quenched and then case hardened for life time of service.

JET 27" x 48" Forks, 6000-LB Capacity PALLET TRUCK -- 200 degree turning radius. Articulating 7" poly-over-aluminum steer wheels. Rounded fork tips with nylon guide rollers for trouble free pallet entry and exit. 

JET 22-1/2-Ton Capacity Hydraulic BOTTLE JACK -- JET JHJ Series bottle jacks are used for multiple applications: pushing, bending, pressing, or straightening. With base and cylinder electrically welded together to assure strength and eliminate leaks, extreme temperatures do not affect them. The JET low profile truck models or standard models vary in capacities from 12-1/2 tons to 100 tons. All JHJ Series bottle jacks comply with ANSI/ASME B30.1 and PALD-1 standards. See True Value # 724623

JET 20-Ton Capacity SJ Series SCREW JACK -- Contractor quality mechanical jack for all-purpose lifts and supports. Holds heavy loads indefinitely - will not creep. Heavy-duty bell shaped cast base. Less effort required to lift capacity load with new design. Corrugated steel swivel head turns easily under load. Easy to carry and position with built-in handle.

JET 6-Ton Capacity SJ Series SCREW JACK -- Contractor quality mechanical jack for all-purpose lifts and supports. Holds heavy loads indefinitely - will not creep. Heavy-duty bell shaped cast base. Less effort required to lift capacity load with new design. Corrugated steel swivel head turns easily under load. Easy to carry and position with built-in handle. Compliance: ANSI/AMSE B30.1 standards. Turning bar is optional

This extra heavy duty come along is made for heavy lifting, pulling, winching. It is also portable, weighing only 24 lbs.

 

1 ton puller also available for $18.00/day

This cordless come along can pull, lift or stretch up to a ton! For raising, tightening, loosening, lowering, stretching, tying down and more.

 

3 ton puller also available for$35/day

Master Mechanic, 12', 10 Gauge, 200A, Booster Cable

Strap Wrench

Car Dolly

A good Equipment Trailer is almost as important as the equipment it hauls, so why not get the best. The Bri-Mar Equipment Trailer series makes any job easier for quick loading and unloading of pavement, construction or landscaping equipment.

Our complete gas-welding kit includes an oxygen and acetylene tank with regulators, along with a brass torch assembly with turbo lever. Use this oxyacetylene torch for welding pipes and tubes, and other metal repair work. It's also used to fabricate metal artwork. Use it for iron or steel welding, plus brazing, braze-welding, cutting, bending and forming.

Heavy gauge steel construction with rust free baked finish. Portable design with carrying handle, 4' rubber hose and durable valve chuck.

Features include: Overload and reverse polarity protection. Built in 1 hour timer and charging mode select switches on front panel. Can be used on any auto, truck, or deep cycle batteries. Flooded, maintenance free, gel cell, and VRLA, 6 and 12 volt.

Power lock button, 12" polishing surface and a stronger 1.8 amp direct-drive motor gets the job done faster. Polishing pads sold seperately.

Unique pinless hammer provides for stability. Distinctive clutch design generates maximum power.

Ideal for body work on cars and trucks

The weight of the load prevents the ratchet pawl from disengaging while under load. Includes 2 stands.

Able to cut through metal up to 3/4 in. thick

For pressing, bending and straightening operations. Easy to use.